Create a CAT6+ network that is secure, reliable, and easy to install
Start with an empty panel at the rough-in stage, then choose a kit with all the components that meet the project scope and technology requirements. Kits include a hinged cover, distribution modules, CAT6/CAT6A jacks, and faceplates — all in one part number.
Empty MediaMAX panels are typically installed with cable runs during the rough-in stage of construction projects. Panels come with rubber grommets to seal cable entry ports and a cardboard paint shield to protect the panel during the installation of sheetrock and painting.
Empty panels for the rough-in stage are available in
plastic (15”, 30” and 45” sizes) and in metal (28″ and 42″ sizes).
Trim and Finishing Stage
After rough-in, panels are configured with components according to the network design. There are CAT6 and CAT6A configuration kits available for typical voice/data/Coax project requirements.
Cover Installation Stage
After trim and finishing, install included panel cover to protect network components.
Kit Part Numbers
Contractor kits bundle the CAT6 or CAT6A components needed to complete typical terminations from the media panel to the wallplate. Kits include mounting brackets, jacks and designer faceplates needed to build a complete smart, connected or basic home network.
(CAT6+ & COAX)
(CAT6+ & Limited COAX)
(Limited CAT6+ & COAX)
Items can be ordered individually
|Part Number||Description||Part Number||Description|
|MXE-15P-1G2||15″ Plastic panel (empty)||MXE-30P-1G2||30″ Plastic panel (empty)|
|MXE-45P-1G2||45″ Plastic panel (empty)|
|SAE-28NY||28″ Metal panel (empty)||SAE-42NY||42″ Metal panel (empty)|
|MXE-ACC-1||Plastic panel mountitng kit||SAE-ACC-1||Metal panel mountitng kit|
|STAR6APDJ||CAT6A 10 Gig data jack||STAR6000C6T||Tool-less CAT6 jack|
|SAM-SP8||8-port universal patch module|
|SAM-RFH4||1 x 4 COAX RF splitter – 3GHz||SAM-RFH8||1 x 8 COAX RF splitter – 3GHz|
|STAR500F-C-85||3GHz F81 COAX connector|
|FD-11-SCR||1-port screw-on faceplate||FD-12-SCR||2-port screw-on faceplate|
|FD-11-SNO||1-port snap-on faceplate||FD-12-SNO||2-port snap-on faceplate|
|MXE-15C-1G2||15″ Plastic vented cover||MXE-30C-1G2||30″ Plastic vented cover|
|MXE-45C-1G2||45″ Plastic vented cover|
|SADC-28VZ||28″ Metal door cover||SADDC-1428||42″ Metal door cover|